Flooring for pharmaceutical, electronics and technology facilities

Clean production and sensitive electronics need floors that are seamless, easy to clean and safe for equipment. We install systems built around those needs.

Pharma and clean manufacturing rooms need floors with no seams or joints that trap dust and residue. We install seamless epoxy and urethane floors with integral coves that stand up to frequent washdowns and cleaning agents. Systems are chosen for the chemicals, traffic and cleaning methods each room actually sees.

Electronics assembly areas and data centres need static control. Our ESD flooring helps protect sensitive components and equipment. Pharmaceutical packaging lines and supplement production rooms need cleanable floors that handle frequent washdowns. Our crews plan work around production schedules and shutdowns, and all work is warrantied, with terms set per project.

What the floor has to handle

Built for how the space is used

CleanabilitySeams and open joints trap dust and residue. A seamless floor with integral coves is easier to clean and inspect.
Static controlStatic can damage electronic parts and equipment. ESD floors help move charge safely to ground.
Chemical and washdown exposureCleaning agents and process chemicals wear down weak coatings. We match the resin system to the products you use.
Production downtimeLines and server rooms cannot sit idle for long. We phase work and schedule around shutdowns and off hours.
Integral coving

Why coves matter

A cove carries the floor up the wall in one seamless piece. There's no joint at the base of the wall for water, chemicals or bacteria to get into.

DELAGA installs radius and 45° coves from 2" to 9" high, in the same resin as the floor, so floor and wall base clean as one surface.

Waterproof wall baseWith a urethane cement or polyurethane system, floor and cove form one sealed, chemical-resistant surface. Wash-down water stays out of the wall joint.
No mould at the wall lineMoisture can't seep into the floor-to-wall joint, so mould and bacteria have nowhere to grow.
Faster, cleaner wash-downRadius coves have no corner for dirt to pack into. Hoses and squeegees reach every edge.
A detail inspectors look forSealed, cleanable wall bases are expected in food, healthcare and lab spaces. Coves help your facility meet that standard.

Common in commercial kitchens, food processing, hospitals and labs, manufacturing and mechanical rooms.

Plain wall joint compared with an integral cove Without a cove Open joint traps water and dirt With an integral cove 2" to 9" One seamless, washable surface
Common cove heights
2-inch cove2"
4-inch cove4"
6-inch cove6"
9-inch cove9"
45-degree cove45°
Questions

Pharmaceutical, Electronics & Technology: FAQ

Do you install ESD flooring?

Yes. We install static-control floors for electronics assembly, labs and server rooms. The system is selected to suit the equipment and use of each room.

Can you work around production schedules?

Yes. We phase work by room or zone and plan around shutdowns, nights and weekends. The schedule is set with your team before work starts.

What floor works for clean rooms?

Clean rooms need a seamless floor with no joints that trap dust and residue. Epoxy or urethane with integral coves is a common choice, selected to suit your cleaning agents and room classification.

Will the floor resist our cleaning chemicals?

We choose the resin system based on the products you use. Share your cleaning and process chemicals during the site assessment so we can match them.

Related industries

See what your floor will cost

Answer a few quick questions and see your estimate in about two minutes. A formal quote follows a site assessment.

Get an instant estimate